Quote:
Originally Posted by ScottSmith
I checked, the cool side (bottom line) of the cooler goes to the side that has the accusump plumbed in. Again, not sure if that's right, or if that's just what fit given the lines we had laying around ;-)
The accumulator is in the passenger compartment; I have a bulkhead connector on the firewall (not visible in the picture).
[edit] Not pictured; I cut off the extra coolant hose, tapped it for 3/8" NPT, and used some aluminum plugs. I used some epoxy like JB Weld to seal it and hold it in place. That way it wasn't dangling around or in the way.
|
Do you have a link to the mishimito return fitting you have on the oil cooler to plumb the accusump into? Assume it's just an AN10 fitting?