Quote:
Originally Posted by ICTZHP
The LCA's and tension struts have the same torque specs. The bolts to the subframe are one use stretch bolts. The spec is 74 ft-lbs +90 degrees. The nuts for the ball joints are also supposed to be one use as well. I was more concerned with replacing the stretch bolts than the nuts. Oh, the knuckle torque sounds about right, I know it was 120 something ft-lbs, the exact value escapes me.
Hope this helps!
|
Thanks!
So its:
31106797237 hex screw with collar for LCA to subframe
31106795930 hex screw with flange for tension strut to subframe
33306787062 combi nut x2 (optional, but advisable)
from what i can gather on real oem