[QUOTE=230iZTR;25127728]
Quote:
Front & Rear: 17x9" ET42 with 255/40-17 tires
Available in ARC-8 design only.
At least 8mm or 10mm front spacers required (hub extender required). 12mm can also work with negative camber dialed in./QUOTE]
I saw the Fitment Guide for the F22 was updated to include a 17x9et42 track setup. Do you have additional information? Does it work only at stock ride height? Does it hit the brake pad vibration damper as previously mentioned? Got any pictures of the setup?
|
Thanks for the post! The 17x9" ET42 was added for those who are specifically looking to use a 17" square fitment.
Because of the camber requirement, it's not ideal for a street-only car or for someone looking for a direct bolt-on fitment. It's perfect for combined street/track car as the ability to rotate the tires front-to-rear will cut down on tire costs, and a car like this will already have camber plates installed.
As noted above, brake pad modification is necessary, and front negative camber is required. It can work at any ride height as long as the proper amount of negative camber is dialed in up front.
It's not a very common setup, so unfortunately we don't have any additional photos yet.
Hope this helps!
Dylan