[PeterWT]

Originally Posted by Expert@ApexRaceParts

PeterWT,

We do not have any plans to release the SM-10 in those fitments at this time, although we would love to offer something similar for the 2 series community in the future. If you are looking into a set of our SM-10 wheels today, we only currently offer the SM-10 in a squared 18x8.5" ET35 fitment that we know will work with the F2x chassis. I have included some details on this fitment below:

Front & Rear: 18x8.5" ET35 with 225/40-18 tires

- Direct fit.

- 235/40-18 tires are typically a direct fit, but may require a touch of front negative camber if lowered.

- 245/35-18 tires require approximately -1.5 degrees of front camber, and may require a touch of rear negative camber depending on tire brand and suspension setup.

- 255/35-18 tires require approximately -2.2 degrees of front camber and -1.8 degrees of rear camber depending on tire brand and suspension setup.

We know that this isn't quite the 18x8" and 18x8.5" staggered setup that you were looking for but if you are looking to mount the SM-10 on your 2 series, this will be the only option at this time.

- Max

Thanks for the follow up and additional detail Max.

I'll wait to see if you guys offer something close to that fitment in the future. Fingers crossed...