Haven't done it, but looking at the offsets
on their website, the 17x9.5et37 (71HP7095N67A) won't work in the back. You could probably do the 17x8et46 (71MB7080N63A) with a ~5mm spacer in front and a 17x9et46 (71MP7090N68A) in the rear if you're not real low. You'll also need hubcentric rings to reduce the bore from 80.77mm to 72.56mm unless they can do that custom as well. Might be able to do a 17x9et46 square setup with camber plates, a ~8-10mm spacer, and an inner-fender lip roll in the front.
__________________
17x9 APEX Arc8-R, 255/40/17 RE71RS, Vorshlag Plates, Swift Spec-R Springs, m-Performance Bumpstops, Dinan ShockWare, Paragon 2-piece rotors, Carbon lip, custom 3" alumalite splitter, GTS wing, FTP Intake and Charge pipe, BootMod3 Stage 1 OTS