[Polo08816]

If anyone is interested, I'm selling the tools I used for this DIY here:

http://f30.bimmerpost.com/forums/sho...1#post21487001

Originally Posted by Polo08816

I've just completed my BMW M Performance Limited Slip Differential install on my 2014 F30 335i RWD SAT M Sport. I wrote a DIY write-up here on how to use these tools.

Here are the tools that are included in this sale:

1. BMW tool #: 2 240 515
BMW part #: 83302240515
Torx E10 socket required to clear the fuel tank in order to remove vibration damper.

2. HPA Differential tool
Allows you to disconnect and rejoin driveshaft (aka propeller shaft) from differential.

3. BMW tool #: 33 5 120
BMW part #: 83300495851
BMW special pry bar used to remove and install output shafts into differential. Here's the ISTA page on this tool.
This is a toolset that includes the following BMW tools:
33 5 121
33 5 122
33 5 123
33 5 124
33 5 125
33 5 126
33 5 127

4. BavAuto CV Axle Prybar.
This was not needed for my RWD car.
https://www.bavauto.com/b8800037


These are all the special tools required to:

• Remove vibration damper on the back of the differential
• Disconnect driveshaft
• Separate output shafts from differential
• Re-insert output shafts into differential
• Re-join drivewhaft to differential