|
You guys might screw up your ECU if you keep coding stuff randomly, that you're not sure about...
Here is the coding for 'Comfort Exit/Entry'
The werte "64" = 100mm of retraction, lower the number from 64 or convert the hex value entry to decrease the retraction, if you please.
I've done it on a couple of BMWs, it's guarantee to work. I'm not sure if it works for 2018 though, since some folks been having issues with the new MY and coding. Good luck.
19bis
Driver Seat:
3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64
3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00
Passenger Seat:
3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = UKNOWN, WERTE=03
3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64
3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00
|