I tried coding this today using BimmerCode, but there was no Modus_FA_SLV option under 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE (although I see it in the demo mode).
I did not attempt to change the other values I've seen referenced here and above (one of the following was not active):
30C0 EINSTIEGSH_LN_AKTIV set to: aktiv
30C0 EINSTIEGSH_NG_AKTIV set to: aktiv
30C0 PRIO_ACHSEN set to: 1 or 2
I see Modus_FA_SLV missing on some older SM ECU firmware
https://f30.bimmerpost.com/forums/sh...020138&page=13 (post #266), but I would have expected my 2017 F87 to support it.
It does show SM 3012 EAH_VERFAHRWEG_SLV_PHYS and SM 3012 EAH_SHUTZFREIRAUM_HINTEN_SLV_PHYS options however.
I'm wondering if I should just try setting 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE to werte=03.