Quote:
Originally Posted by jul2412
Quote:
Originally Posted by CharlieF576
Looks brilliant! I have one problem doing the upgrade with mine though, I've fitted the screen and there was no problem there but after the coding the display doesn't seem to work...
In the coding the two entries you say to change are:
HU_NBT > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_NBT > 3001 EXBOX > DISPLAY_VARIANTE = breites_display
But when I go online with my car the entries I have are:
HU_ENTRY > 3000 HMI > DISPLAY_SIZE_RESOLUTION = 8.8_1280x480
HU_ENTRY > 3001 EXBOX > DISPLAY_VARIANTE = breites_display
But it still doesn't work. In the original post it said you need HU_ENTRY so I'm wondering if anyone could shed some light on this for me.
When you start the car you can hear the radio and stuff, it's just the screen not displaying anything.
|
Someone correct me if I'm wrong, but you need to have HU_ENTRYNAV, as per original post:
You need to have HU_entrynav not HU_Champ2 for this to work if your car was made either 03/14 or 07/14 later depending on model f2x/f3x check first
|
Sorry to ask such stupid questions. How can I tell the difference?
I have navigation and Bt audio etc available in the idrive (from factory) and here is a picture of my head unit.
EDIT.
I just checked the coding again and I have HU_ENTRYNAV not HU_ENTRY
When I go into HU_ENTRYNAV it comes up with "CAF[HU_NBT] at the top I think I've made much a fuss about nothing...