Quote:
Originally Posted by Gemini
Quote:
Originally Posted by Poochie
You guys might screw up your ECU if you keep coding stuff randomly, that you're not sure about...
Here is the coding for 'Comfort Exit/Entry'
The werte "64" = 100mm of retraction, lower the number from 64 or convert the hex value entry to decrease the retraction, if you please.
I've done it on a couple of BMWs, it's guarantee to work. I'm not sure if it works for 2018 though, since some folks been having issues with the new MY and coding. Good luck.
19bis
Driver Seat:
3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = Modus_FA_SLV
3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64
3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00
Passenger Seat:
3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = UKNOWN, WERTE=03
3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS = Werte=00, 64
3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS = Werte=00, 00
|
So I managed to use this to code the driver seat in my 2018 M240 about a month ago. However, they just did some software update as part of a recall when I brought my car in for servicing today and it wiped this. I tried recoding it but doesn't work. One thing I noticed is that EAH is 3015 now rather than 3012.
Any help would be appreciated! |
Last month I had a software update done also and lost the feature, including the option to increase the 'triple-turn signal'..
When I attempted to recode the Easy Exit/Entry, initially, it also was not working.
Funny, I then got tired of messing with it and left. The next morning it worked fine.
I suspected that when the battery is close to being drained, it's doesn't commence.
Double check the parameters, code it in again, then power down the vehicle and let it go to 'sleep mode,' then retry it.
This might solve your issue.
I also notice then when try to retract and detract the seats with the physical control, after a certain distance, it stops and you have repress the button to get it going again.
I guess this must be a safety feature they implemented via the new software integration.
Do you happen to know the iStep version was uploaded to your vehicle?