Quote:
Originally Posted by M_Six
These do. The new Lutron Caseta Diva switches. They have a 3rd wire if you want to use them in a 3-way setup, but this was single pole, so I just used the 2 wires. My switch boxes are metal and they're grounded, so I didn't even need the green ground wire.
|
That surprises me too. You'd think they'd need the 3rd to power it when it was off like most others.
I have 2 of the old remote Lutron left in my house. I've replaced everything else with KASA as I've needed too. These have survived the swap because they are within eyesight of my Harmony Hub with can control them, so I can still control them with voice or app. If these are like mine - you set the high limit and one press takes them to that level and a double click takes them to 100%. They work very well. I have my low set on very low and use it for my "movie" setting and 100% when I need to see. But I have vaulted ceilings so even 100% is not overpowering.
Great switches - they have served me well even with my "smart" workaround. LOL