[Babyboibluf22]

Hi guys, I see ya’ll posting your setups and recommendations, I myself visited this page and found it very helpful, so I figured why not make some time to share my own setup with everyone and for those who are interested in going this route.

Keep in mind all these mentioned are all my parts for suspension anything else not mentioned are not installed i.e. spacers, lower control arms etc.

Wheel Setup: Apex FL-05 18x8.5 et35 (Square setup)
Tires: Federals 595rsrr 255/35r18 (Square setup)
Suspension: KW V3’s (not necessary with 245’s square setup but with 255 you might need coilovers)
Front fenders rolled (minor work)

Now note that my setup I had minor front fender done, and coilovers, but through my experience, 245/35r18 (square) works just fine with no other mods but lowering springs. Can adjust rear camber with stock suspension if you choose to do so I believe it can be adjust to around -2 camber. Also, coming from 245 to 255 yes it looks a tiny bit more aggressive but it’s much near identical. So a 245 vs. a 255 setup is just equal in terms of aesthetics.


More content on my Instagram: Babyboiblu_f22