Quote:
Originally Posted by 230iZTR
Haven't done it, but looking at the offsets on their website, the 17x9.5et37 (71HP7095N67A) won't work in the back. You could probably do the 17x8et46 (71MB7080N63A) with a ~5mm spacer in front and a 17x9et46 (71MP7090N68A) in the rear if you're not real low. You'll also need hubcentric rings to reduce the bore from 80.77mm to 72.56mm unless they can do that custom as well. Might be able to do a 17x9et46 square setup with camber plates, a ~8-10mm spacer, and an inner-fender lip roll in the front.
|
Just want to do the back, currently running a 19.9.5 et45 in back so I think I can make those fit. Just really need to know what the backspacing measurements mean