Quote:
Originally Posted by ggggbmw
Also, reading through the 'bedding-in' page at EBC:
https://ebcbrakes.com/articles/bedding-in/
This seems like a really long and complicated procedure. And the opposite of the advice I've always seen for regular pads, which is to do the high speed bedding as soon as possible and avoid lots of light application driving to start.
|
EBC recommends light use at first due to the "brake in coating" on them. This coating is SUPER grabby. They don't want you to bed the brakes till this coating is all worn off, then it's pretty much a standard bedding procedure.