Following the thread as I have encountered a possibly related issue.
So I have my first drivetrain malfunction while running hard UPHILL Friday of last week. Car was fine later after turning it off and on again. The drivetrain malfunction went away without me clearing any code. Haven’t have issue since.
The code I pulled was also 11A002 high-pressure fuel, plausibility: pressure too low
and 118401 mixture too lean.
Here is a log I did this yesterday
https://www.bootmod3.net/log?id=6254...KDW11uefqEbVNI
Car is 2018 m240i at 42k miles, tuned bm3 stage 2 about 2k miles ago with plugs changed and stock hpfp and lpfp.