View Single Post
      12-14-2019, 12:36 AM   #3
RMMAGA
Private
73
Rep
95
Posts

Drives: 120i
Join Date: Sep 2018
Location: China

iTrader: (0)

the car is throwing a code, you should find out what code by reading it

it does sound like a pretty serious code if it limits RPM

note that on my stage 2 custom tune the redline was upped form 6500 to 6800 RPM, note that the trans is limited to 7000 rpm, if I put it in manual mode and just floored it to reline without shifting, it would overshoot to 7000 RPM, at that point the trans would disconnect with a loud CLUNK and it would put car into N, and throw a transmission over-speed error code, most likely if the redline was set a little lower like 6700 that would not happen

note you may want to also consider bootmod3 stage 2 flash, that is very stable, I tried that as well, it runs more timing and less boost and also does not change the redline, and you can read the codes and try different flash your self
Appreciate 0