Quote:
Originally Posted by quenotte
rwalker reduced 1/2" spacer by half a millimeter: 12.7-0.05 = 12.65mm
6.35+12.65 => 19mm length like Pparana
But then Pparana, you talk about 15mm (rear/inside) + 7mm (front/outside), that lead to a length of 22mm, 3mm more than previous setup!
So what are the right values in mm to match F8x geometry, more correct wheel placement and less bushing wear, ?
Many thanks in advance!
|
1/2mm is 0.5mm not 0.05mm
12.7 -> 12.2
19mm -> 18.5mm
Based RW's experience, I have 12.2mm and 6.3mm spacers 30mm OD and m12 ID