Howdy!
Hoping someone can help
I've installed LEDs in my brake lights. I've also coded off cold & warm checking (set to nicht_aktiv) and set BL is LED (both left & right) to aktiv.
They're still blinking for the error checking the car does. I am guessing I've missed a setting.
Hoping someone can point me in the right direction.
FYI - I've coded off error checking for all turn signal LEDs & the reverse lights, and no flashing. Just letting you know so you understand I know how to code. (Or so I tell myself.)
I went back into E-Sys & even verified these settings were all changed.
Settings I've coded:
xxx_x_x_KALTUEBERWACHUNG - set to nicht_aktiv
xxx_x_x_WARMUEBERWACHUNG - set to nicht_aktiv
xxx_x_x_IS_LED set to aktiv
For both:
REM/3061/BL_L
REM/3061/BL_R
Jim