Quote:
Originally Posted by RyonC
Most people need a small spacer about 1mm in thickness to minimize knocking
I'd also recommend replacing the nuts and bolts.
|
Ok, so I am going to go ahead with both LCA + TS in my 2020 m240i (stock 18s) along with dinan springs + bump stops. Is anyone having issues with this setup? I am a bit of a noob on this subject, what info would be best to relay to my installer? They may or may not need the spacers? I have LED headlights so I don't think the headlight level sensor applies to me? Does anyone have links to all the nuts and bolts needing to be replaced?
Here is the parts list I plan on providing them, anything else I need/should tell them in advance?
https://www.turnermotorsport.com/p-5...e-kit/?pdk=AQE
https://www.summitracing.com/parts/KYS-100-377-3
https://www.summitracing.com/parts/KYS-100-377-1
https://www.ecstuning.com/b-genuine-...t/31122284531/
https://www.ecstuning.com/b-genuine-...t/31122284532/
This is my daily driver so I need reliability above all else, and want to avoid rubbing at all costs! Thanks guys.