[MVBUILT]

Originally Posted by f22_bbb

Hard to tell... I was unaware that the H&Rs lowered it by that much compared to Dinan. You may need to do a slight fender roll on the fronts or maybe get the 3 deg of camber as you mentioned (Maybe someone with H&R springs can chime in). The Vorshlag website states a "2.5deg of additional camber" over stock. I dont think stock suspension is camber adjustable, or if it is, it's probably very small. So you're looking at 2.5 deg max with the camber plates.

If you want to get into the 3 deg range, you're going to probably need a few more modifications. A popular one is the F8X M3/M4 LCA & TS upgrade, which I plan to do soon. Much material about that can be found on both 2 series and 3 series forums.

FYI, getting into the 3 deg range will seriously eat up your tires if you're going to do mostly street driving. I would recommend like 2.2~2.3 max for everyday driving, even then you may see uneven wear pretty quickly.

Thank you. Yeah I've been also looking into m3 LCA. might just have to run a 245 squared setup. Only was talking about 255 cause the wheels are used and already have 255 nexen SUR4G (brand new) on them