Quote:
|
Originally Posted by CalCarNut
Quote:
Originally Posted by Pillz17
so this is what I have put together for my "build" remember I'm looking to keep it a daily driver but add a little more power to it. ideally I want to get it to 350whp but it's looking like a pipe dream please give me some feed back thanks
these add ons would put my 2016 228i xdrive at
base
240 +(59)=299
dinan said stock is
261+(59)= 320
do i believe dinan or the factory
|
Stock (crank) rated is 240hp. Baseline stock wheel hp is more like 228hp. The 240 is under-rated or the parasitic loss is like 5% (not likely). A Dinan Stage 1 tune gets you about 39HP..(not 59 net) so you're around 267whp. My car with just a mild Stage 1 puts out 248-250whp and 317wtq. I wasn't looking at wringing every last possible HP out of the tune as I wanted some built in safety. I doubt you'll ever see 350WHP on the N26 for any length of time (read =Kaboom).
The N26 is the same as the N20; the only differences really are the more restrictive Cat(s) that supposedly pull the power down. I haven't seen an N20 dyno that says it's significantly more than an N26 honestly. The rest of the parts on my car (hoses, etc.) all say N20. |
Thanks for the info and dropping some realistic numbers on me I just want some enjoyable rides on the open road and make it my own