Quote:
Originally Posted by aerobod
The injector adjustment values do have to be coded. Here is the injector replacement sequence, lots of attention to be paid to handling the teflon seals and the removal tension and torque limits if the original injectors are ever going to be used by anyone again: https://www.newtis.info/tisv2/a/en/f...alves/ITkr1aNI |
thank you for this, i tried to code them with my foxwell NT510 but its saying it is not supported. So a bit stuck, going to see if it needs an update before i can code them.
Also this site suggests that the injectors have 3 numbers to code for corrispoing injectors but i found all the number to be the same except a sequence of 5 numbers on the injectors.
__________________
07 e90 335xi- Sold, 09 X5- Sold, 12 e92 335 xdrive - Sold 11 e92 M3- Sold, 15 M235-Sold,07 e90 335xi (current daily), 10 Atlantis e92 M3 (current) Way to many mods to list