Quote:
Originally Posted by ScottSinger
Do u install the sert while oil is draining out to exit any debris
|
No you have to do it with the oil out of the pan because you wouldn't t be able to see if your drilling the drain hole or tapping it correctly and you would get oil all over your drill. After draining the oil you then put grease on the threads of the drill bit and the tap to catch the majority of the shavings, after you have installed the time sert and let the thread locker dry. You can then flush any shavings out of the oil pan with new some oil. I am just going to buy like two or three quarts of some cheap 5w-30 synthetic oil to flush out any shavings that might be in the pan after I do the job. I then will fill it with the OEM BMW 0W-30 synthetic oil. I saw this video on YouTube last night from the manufacturer on how to do the job.