[abirmaher]

Originally Posted by bmw_fascinated

I also have a set of new tail lights here and hope to find the time to install them soon.
It is not completely plug an play since the new ones have a 6 pin plug, but it is not that much work to change the wiring.
Some coding is also necessary, this I got coded on my car (as I said, the light are not installed yet, so no warranty for this):

Rückfahrscheinwerfer LED

3061 RFS_L_KALTUEBERWACHUNG -> nicht_aktiv : Disabling cold bulb checks for Rear Left Reverse Light.
3061 RFS_L_WARMUEBERWACHUNG -> nicht_aktiv : Disabling warm bulb checks for Rear Left Reverse Light.
3061 RFS_L_IS_LED -> aktiv : Setting Rear Left Reverse Light Type to LED.
3061 RFS_R_KALTUEBERWACHUNG -> nicht_aktiv : Disabling cold bulb checks for Rear Right Reverse Light.
3061 RFS_R_WARMUEBERWACHUNG -> nicht_aktiv : Disabling warm bulb checks for Rear Right Reverse Light.
3061 RFS_R_IS_LED -> aktiv : Setting Rear Right Reverse Light Type to LED.
MAPPING_RUECKFAHRL_L_PWM_LEVEL_1 13.7V = 89
MAPPING_RUECKFAHRL_R_PWM_LEVEL_1 13.7V = 89

Bremslicht LED
BL_L_KALTUEBERWACHUNG nicht_aktiv = 00
BL_L_IS_LED aktiv = 01
BL_L_UE_SPG_SCHUTZ nicht_aktiv = 00
BL_R_KALTUEBERWACHUNG nicht_aktiv = 00
BL_R_IS_LED aktiv = 01
BL_R_UE_SPG_SCHUTZ nicht_aktiv = 00

MAPPING_BREMSL_L_PWM_LEVEL_1 13.7V = 89
MAPPING_BREMSL_R_PWM_LEVEL_1 13.7V = 89


Fahrtrichtungsanzeiger auf LED
FEM_BODY/REM 3061 FRA_H_L_KALTUEBERWACHUNG nicht_aktiv Rear-Left Turn Signal Bulb Cold
FEM_BODY/REM 3061 FRA_H_L_WARMUEBERWACHUNG nicht_aktiv Rear-Left Turn Signal Bulb Warm
FEM_BODY/REM 3061 FRA_H_L_IS_LED aktiv Rear-Left LED bulb **May cause CheckEngine Light**
FEM_BODY/REM 3061 FRA_H_R_KALTUEBERWACHUNG nicht_aktiv Rear-Right Turn Signal Bulb Cold
FEM_BODY/REM 3061 FRA_H_R_WARMUEBERWACHUNG nicht_aktiv Rear-Right TurnSignal BulbWarm
FEM_BODY/REM 3061 FRA_H_R_IS_LED aktiv Rear-Right LED bulb **May cause Check Engine Light**
MAPPING_BLINKER_H_L_PWM_LEVEL_1 13.7V = 89
MAPPING_BLINKER_H_R_PWM_LEVEL_1 13.7V = 89

Nebelschlusslicht LED
NSL_L_KALTUEBERWACHUNG nicht_aktiv = 00
NSL_L_WARMUEBERWACHUNG nicht_aktiv = 00
NSL_L_IS_LED nicht_aktiv = 00

NSL_R_KALTUEBERWACHUNG nicht_aktiv = 00
NSL_R_WARMUEBERWACHUNG nicht_aktiv = 00
NSL_R_IS_LED aktiv = 01

MAPPING_NEBELSCHLUSSL_L_PWM_LEVEL_1 13.7V = 89
MAPPING_NEBELSCHLUSSL_R_PWM_LEVEL_1 13.7V = 89

Much appreciated info!