07-03-2016, 04:02 PM | #1 |
Lieutenant
227
Rep 465
Posts |
Help: Battery Tube Thingy
I wonder if somebody can help.
While adding Dynamat to the trunk area I accidentally pulled out a grey tube going to the battery. Can someone please tell me what this tube is and where it is supposed to plug into? Many thanks. |
07-03-2016, 05:59 PM | #2 |
Major General
3074
Rep 5,577
Posts |
My guess is it's a vent tube for the battery - lead acid or what ever concoction they use releases gases and since trunk is not vented like a front engine compartment they add the vent tube.
Near by you should see a hole the tube fits into, probably on the floor of the trunk somewhere. |
Appreciate
0
|
07-04-2016, 02:49 PM | #3 |
Lieutenant
227
Rep 465
Posts |
Thanks, Scott.
If anyone can snap a picture of where the tube goes, I'd be grateful. Didn't see anything obvious. I might have Dynamatted over it! |
Appreciate
0
|
07-04-2016, 03:45 PM | #4 |
Major
882
Rep 1,202
Posts |
|
Appreciate
0
|
07-06-2016, 03:59 PM | #6 |
Lieutenant
227
Rep 465
Posts |
For the record, for those who make the same mistake I did, the grey tube attaches to a spot on the floor, as Scott says. You can see the location in Beartato's picture.
But note that the hose attaches to a black ridged plastic pipe rather than a hole. It's easy to miss because the surrounding area is tight and dark. It's also hard to get to. My hand wouldn't fit. I had to use needle nose pliers to get the tube onto the pipe. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|