Aftermarket wheels for the m235i ?

Liquidpaper · 02-23-2015, 06:08 PM

Quote:

Originally Posted by Sp1ke

Liquidpaper THANK YOUUU!!!
Thats exactly the color combo & wheels I've been
waiting to see. We need clearer, smaller pics please
lol

Glad you like. I'll take some better pics and post them.

Liquidpaper · 02-23-2015, 11:04 PM

Quote:

Originally Posted by Sp1ke

Liquidpaper THANK YOUUU!!!
Thats exactly the color combo & wheels I've been
waiting to see. We need clearer, smaller pics please
lol

Here you go

Ian_Mark · 02-23-2015, 11:13 PM

no spacers needed? tempting to pick a setup. and soo much space in those parking garages. I miss socal. parking here is like squeezing into a spot meant for a motorcycle.

Liquidpaper · 02-23-2015, 11:20 PM

Quote:

Originally Posted by AWTraveler

no spacers needed? tempting to pick a setup. and soo much space in those parking garages. I miss socal. parking here is like squeezing into a spot meant for a motorcycle.

No spacers, but you do need camber -- I have Ground Control plates in the front. My setup is F 2.25, R 1.65 (could use some more, maybe 1.8), and 1/16 toe in.

Sp1ke · 02-24-2015, 04:58 PM

Thanks for posting more. Really looks
good. Might just need a little drop. Is
there a reason u went with the square
set up? I saw the staggered set has a
real high offset on the rears.

Liquidpaper · 02-24-2015, 05:59 PM

Quote:

Originally Posted by Sp1ke

Thanks for posting more. Really looks
good. Might just need a little drop. Is
there a reason u went with the square
set up? I saw the staggered set has a
real high offset on the rears.

I frequently take the car to the track -- that's why I went square.

Anderw · 02-24-2015, 06:03 PM

Quote:

Originally Posted by escobar929

took a quick pic while waiting for an alignment today

damnnn v701s look great on your car

challer · 03-04-2015, 09:29 AM

Did anyone here ultimately find aftermarket wheels that fit?

escobar929 · 03-04-2015, 07:35 PM

Quote:

Originally Posted by challer

Did anyone here ultimately find aftermarket wheels that fit?

guess it all depends on your definition of fitment cause as far as i can see, this thread is full of people who did

Silvermike · 03-05-2015, 04:56 AM

Quote:

Originally Posted by abirmaher

More pictures to come but for now just threw these VMR 710's in Gunmetal.

Front 19x8.5, M PSS 225/35/19
Rear 19x9.5, M PSS 255/30/19

challer · 03-05-2015, 06:11 AM

Quote:

Originally Posted by escobar929

guess it all depends on your definition of fitment cause as far as i can see, this thread is full of people who did

#shotsfired

Ricfutures · 03-05-2015, 03:05 PM

Still a fan of my CH-Rs.

http://europeanautosource.com/blog/e...ansformed.html

Heitzer · 03-05-2015, 08:48 PM

Pleased with my Enkei Raijin which were discussed earlier in the thread - low weight (20.0lbs) and pretty good price.

This is what the 18x8 look like in Hyper Silver. Wearing Michelin winter tires PA4 staggered - but with 245/40 in the back.

Name: IMG_0013.jpg
Views: 8766
Size: 470.3 KB

Name: IMG_0013.jpg
Views: 8766
Size: 470.3 KB

Name: IMG_0010.jpg
Views: 8558
Size: 619.0 KB

Bee Pee · 03-06-2015, 03:40 AM

Heres my m135i with oem F30 397's all round in FG

mblaucoupe135 · 03-07-2015, 07:35 PM

What about VMR VB3 CSL reps in the following sizes? Would they fit ok without rubbing? I'm not lowered.

F: 19x8.5 40mm offset 225/35/19

R: 19x9.5 45mm offset 255/30/19

mblaucoupe135 · 03-13-2015, 08:46 AM

Quote:

Originally Posted by mblaucoupe135

What about VMR VB3 CSL reps in the following sizes? Would they fit ok without rubbing? I'm not lowered.

F: 19x8.5 40mm offset 225/35/19

R: 19x9.5 45mm offset 255/30/19

Can anyone answer my question? Little help please! Lol

e30if · 03-13-2015, 11:14 AM

The rear might run into some problems with rubbing but I really can't say for sure. I know Apex wheels recommended a 58 offset with their 9.5" wheels for the back of the car. Fronts should work no problem.

F80_M · 03-13-2015, 01:06 PM

Quote:

Originally Posted by mblaucoupe135

Quote:

Originally Posted by mblaucoupe135

What about VMR VB3 CSL reps in the following sizes? Would they fit ok without rubbing? I'm not lowered.

F: 19x8.5 40mm offset 225/35/19

R: 19x9.5 45mm offset 255/30/19

Can anyone answer my question? Little help please! Lol

You'll be fine running that set up. It'll only rub over heavy dips

escobar929 · 03-13-2015, 06:33 PM

Quote:

Originally Posted by mblaucoupe135

What about VMR VB3 CSL reps in the following sizes? Would they fit ok without rubbing? I'm not lowered.

F: 19x8.5 40mm offset 225/35/19

R: 19x9.5 45mm offset 255/30/19

I'm running that set up on H&R springs, no rubbing at all

mblaucoupe135 · 03-13-2015, 07:11 PM

Thanks all for the info, I appreciate it. I ran this setup up on my 135i and had pretty major rubbing in the rear so I had to roll the fenders. I don't really want to deal with all that again so maybe I should go with a 245 tire in the rear. It will be super stretched but then I shouldn't have any rubbing issues right?

mblaucoupe135 · 03-13-2015, 07:12 PM

Quote:

Originally Posted by escobar929

Quote:

Originally Posted by mblaucoupe135

What about VMR VB3 CSL reps in the following sizes? Would they fit ok without rubbing? I'm not lowered.

F: 19x8.5 40mm offset 225/35/19

R: 19x9.5 45mm offset 255/30/19

I'm running that set up on H&R springs, no rubbing at all

That's good to know. What kind of tire are you running?

escobar929 · 03-14-2015, 08:02 AM

Quote:

Originally Posted by mblaucoupe135

That's good to know. What kind of tire are you running?

I'm running Yokohama S Drives but you could also use Hankook v12 in a 255 with out problems. From what I've read, only one person had rubbing running a 255 and he had Pilot Super Sports, which run really wide. But there's been others w/ Pilot Super Sports that didn't.

Before summer, I'm going to switch to the PSS since its a much better tire and worth the risk.

BTW, my wheels came from my old 1 series. The front and rear rubbed slightly but no problems w/ the 2 series. Just switched out the TPMS

02-23-2015, 11:13 PM	#157
Ian_Mark Private 14 Rep 86 Posts Drives: '14 228i MSport Join Date: Mar 2014 Location: UK iTrader: (0) Garage List 2014 BMW 228i [0.00] 2005 Subaru Sti [0.00]	no spacers needed? tempting to pick a setup. and soo much space in those parking garages. I miss socal. parking here is like squeezing into a spot meant for a motorcycle.
	Appreciate 0 Quote

02-24-2015, 04:58 PM	#159
Sp1ke New Member 2 Rep 24 Posts Drives: e82 Join Date: Jul 2014 Location: NoVa iTrader: (0)	Thanks for posting more. Really looks good. Might just need a little drop. Is there a reason u went with the square set up? I saw the staggered set has a real high offset on the rears.
	Appreciate 0 Quote

03-04-2015, 09:29 AM	#162
challer Private First Class 45 Rep 119 Posts Drives: 2014 M235i Join Date: Jan 2015 Location: Atlanta, GA, USA iTrader: (0)	Did anyone here ultimately find aftermarket wheels that fit?
	Appreciate 0 Quote

03-05-2015, 03:05 PM	#166
Ricfutures Captain 150 Rep 659 Posts Drives: E90 M3 Join Date: Oct 2009 Location: Seattle iTrader: (0)	Still a fan of my CH-Rs. http://europeanautosource.com/blog/e...ansformed.html __________________ F97 X3M F80 M3 (Sold) E90 M3 (Sold) EB M235i (Sold) E92 M3 (Sold)
	Appreciate 0 Quote

03-05-2015, 08:48 PM	#167
Heitzer Private First Class 103 Rep 130 Posts Drives: M235i; BMW S1000RR Join Date: Feb 2012 Location: MA iTrader: (0)	Pleased with my Enkei Raijin which were discussed earlier in the thread - low weight (20.0lbs) and pretty good price. This is what the 18x8 look like in Hyper Silver. Wearing Michelin winter tires PA4 staggered - but with 245/40 in the back.
	Appreciate 0 Quote

03-06-2015, 03:40 AM	#168
Bee Pee Brigadier General 1774 Rep 4,510 Posts Drives: AW M2 DCT Join Date: Jun 2010 Location: SW London iTrader: (3)	Heres my m135i with oem F30 397's all round in FG __________________ Fettled M135i EB AT then AW M2 DCT - both gone but not forgotten: Current '22 X3M LCI..
	Appreciate 0 Quote

03-07-2015, 07:35 PM	#169
mblaucoupe135 Major 284 Rep 1,287 Posts Drives: 2022 M240i Join Date: Jan 2010 Location: Littleton, CO iTrader: (2)	What about VMR VB3 CSL reps in the following sizes? Would they fit ok without rubbing? I'm not lowered. F: 19x8.5 40mm offset 225/35/19 R: 19x9.5 45mm offset 255/30/19
	Appreciate 0 Quote

03-13-2015, 11:14 AM	#171
e30if Enlisted Member 3 Rep 47 Posts Drives: 1991 318is, 2010 M3 Join Date: Jan 2014 Location: Redmond, WA iTrader: (0)	The rear might run into some problems with rubbing but I really can't say for sure. I know Apex wheels recommended a 58 offset with their 9.5" wheels for the back of the car. Fronts should work no problem.
	Appreciate 0 Quote

03-13-2015, 07:11 PM	#174
mblaucoupe135 Major 284 Rep 1,287 Posts Drives: 2022 M240i Join Date: Jan 2010 Location: Littleton, CO iTrader: (2)	Thanks all for the info, I appreciate it. I ran this setup up on my 135i and had pretty major rubbing in the rear so I had to roll the fenders. I don't really want to deal with all that again so maybe I should go with a 245 tire in the rear. It will be super stretched but then I shouldn't have any rubbing issues right?
	Appreciate 0 Quote