[Pbdeed]

After checking the part numbers , I can confirm that left kunckle has the -30 min correction stock.

So what they did with the change of front spring strut and knuckle (swivel bearing) was correct like 21' degrees, and then an additional degree with the additional correction of the replaced knuckle (from -30 to +30), which resulted in overcorrection.

I guess I´ll ask to fit the neutral one, so my specs in the right front camber should be 1º 47' which is what in the range to achieve with the M4 LCAs + TS fitment (between 1º 30' and 2º).

I attach left (part number 6853651) and right side pictures (6853650)