[Shankska]

Originally Posted by pikcachu

is that on HU_NBT or KOMBI ?

oh true. this was on HU_NBT. So not sure why it has BC stuff in there. Maybe its the setting to enable that in the BC in the idrive?

[BentZero]

Originally Posted by Shankska

only thing I found was -

KI_DISP_CB_MOTOR_TEMP_BC_ENABLE

but I have motor temp on BC and that is working.

This parameter is set to nicht_activ too, but I def have that option on my BC

I enabled motor temp in BC and it always read 0

[Shankska]

Originally Posted by BentZero

I enabled motor temp in BC and it always read 0

My m235i was the same way.

My M2 however, came with this enabled out of factory and works.

I was trying to find wher to enable this on the PSI tire vehicle info on the idrive, because I like to have digital MPH on the BC and not cycle thru

[bizfiend]

Hi
1: is there a way to turn off all exterior lights when the engine is on and when the start button is pressed without holding on the brake.

2: is there a way to prevent the animation that comes on the screen every time you switch to eco pro, comfort, sport, and sport+

3: is there a way to make the drivers seat automatically slide backwards when the engine is turned off, and slides forward when you get in and close the door, or something close to this.

4: is there a way to not have the interior over head lights turn on when you turn off the engine.

Thanks.

[Kolyan2k]

Originally Posted by bizfiend

Hi is there a way to turn off all exterior lights when the engine is on and when the start button is pressed without holding on the brake.
is there a way to prevent the animation that comes on the screen every time you switch to eco pro, comfort, sport, and sport+
is there a way to make the drivers seat automatically slide backwards when the engine is turned off, and slides forward when you get in and close the door, or something close to this.
is there a way to not have the interior over head lights turn on when you turn off the engine.

Thanks.

1.dont know 2.this setting should be in iDrive already 3.yes possible

[reala]

I like asd sound but its too loud in sport mode. Any coding that we can turn it down a bit?

[pikcachu]

Originally Posted by reala

I like asd sound but its too loud in sport mode. Any coding that we can turn it down a bit?

It's on or off

[AbuQutaita]

Does anyone have before/after of coding RDC_SAFETY to aktiv? Without it, I already have temps and pressures when I check TPM, like here: https://lh3.googleusercontent.com/-n...427_205836.jpg

[shawnsheridan]

Originally Posted by AbuQutaita

Does anyone have before/after of coding RDC_SAFETY to aktiv? Without it, I already have temps and pressures when I check TPM, like here: https://lh3.googleusercontent.com/-n...427_205836.jpg

RDC_SAFETY = aktiv is default coding from factory now on new build dates.

[isthar]

Originally Posted by Kolyan2k

1.dont know 2.this setting should be in iDrive already 3.yes possible

What is the coding for 3? (seat moving back/forwards).

Note that in iDrive I have a setting that sounds like it would do this... but frankly I have never noticed it do anything. I have to do things manually, it seems, always.

[Cjnj]

Originally Posted by isthar

What is the coding for 3? (seat moving back/forwards).

Note that in iDrive I have a setting that sounds like it would do this... but frankly I have never noticed it do anything. I have to do things manually, it seems, always.

See post: http://www.2addicts.com/forums/showthread.php?t=1270596

I was able to get it to work with only using the first line of the 3. Might play with the others to adjust it more.

Does anyone know what the values do with the other 2 (ie. what do you change to increase the adjustment back)

[Kolyan2k]

Originally Posted by Cjnj

See post: http://www.2addicts.com/forums/showthread.php?t=1270596

I was able to get it to work with only using the first line of the 3. Might play with the others to adjust it more.

Does anyone know what the values do with the other 2 (ie. what do you change to increase the adjustment back)

edit: post below is more clear

[Kolyan2k]

Originally Posted by pikcachu

It's on or off

Perhaps we can get all that stuff in cheat sheets, the seat movement and VLD "fix"

[pikcachu]

Originally Posted by Kolyan2k

Perhaps we can get all that stuff in cheat sheets, the seat movement and VLD "fix"

I you can gather the codes together in a clean post for those, similar to the cheat sheet format I'll add them

[Kolyan2k]

Originally Posted by pikcachu

I you can gather the codes together in a clean post for those, similar to the cheat sheet format I'll add them

VLD:

FEM_BODY 3073 LUT_FLC_FORWARDLIGHTING_Y = "F020Codierwert mit AFS" (enable with AFS), hex parameters change automatically when you enable AFS to 9C, 9C, 9C

Seat:

SM2(d6) -> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = "Modus_FA_SLV" This activate the seat movement for driver's side (I think SM2(e6) is passenger side)

SM2(6d) -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS < you specify in a hexadecimal value how many milimeters you want the seat to move back

SM2(6d) -> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS < you specify how many millimeters of free leg space you want to keep for the passengers sitting on the back seat

So pretty much tall people that have seat moved far back would need to play with values a bit, for me "Modus_FA_SLV" and all default values did the trick

[Kolyan2k]

PS. I am pretty sure you can adjust VLD settings at which speed to activate the 3 modes (wide, normal, and far) that it uses, but I dont have that info now.

I was also looking to change (decrease) sensitivity of outdoor light sensor, couldn't find this anywhere......perhaps someone might know?

[AbuQutaita]

Originally Posted by shawnsheridan

RDC_SAFETY = aktiv is default coding from factory now on new build dates.

I checked last night, and mine is definitely nicht_aktiv, but I can still see temps.

[pikcachu]

Originally Posted by Kolyan2k

VLD:

FEM_BODY 3073 LUT_FLC_FORWARDLIGHTING_Y = "F020Codierwert mit AFS" (enable with AFS), hex parameters change automatically when you enable AFS to 9C, 9C, 9C

Seat:

SM2(d6) -> 3000 SM_GLOBAL -> EINAUSSTIEGSHILFE = "Modus_FA_SLV" This activate the seat movement for driver's side (I think SM2(e6) is passenger side)

SM2(6d) -> 3012 EAH -> EAH_VERFAHRWEG_SLV_PHYS < you specify in a hexadecimal value how many milimeters you want the seat to move back

SM2(6d) -> 3012 EAH -> EAH_SCHUTZFREIRAUM_HINTEN_SLV_PHYS < you specify how many millimeters of free leg space you want to keep for the passengers sitting on the back seat

So pretty much tall people that have seat moved far back would need to play with values a bit, for me "Modus_FA_SLV" and all default values did the trick

should be updated now

[EEBreh]

I hope someone can compare the coding data between the m235i and the m2. Hopefully we can figure out how to get the temperature gauge to become active when it is coded. Maybe a software update will fix this? Would be cool to get oil temp like the M2.

[moldcad]

Originally Posted by shawnsheridan

None whatsoever.

Shawn,

I didn't use my coding config for a long time; also have E-sys 3.24.3 but don't remeber the data version - how do I check this?

Piotr

[Poboy]

Is it possible to change the throttle sensitivity in Sport+ to match the comfort throttle? I would prefer to have the same sensitivity among my normal driving modes.

[bman6074]

Originally Posted by Poboy

Is it possible to change the throttle sensitivity in Sport+ to match the comfort throttle? I would prefer to have the same sensitivity among my normal driving modes.

I want to opposite comfort throttle to be like sport. Of this is possible please share.