F22 coding cheat sheet

Tano22 · 10-13-2016, 10:04 PM

Quote:

Originally Posted by cth6

First, shawnsheridan and pikcachu

Your coding expertise is awesome.

Just picked up the car and...
Removed 8S4 (Decoding Variable Light Distribution)
Swapped 6NH to 6NS (Enhanced Bluetooth)
Removed seatbelt alarms for Driver and Passenger
Open / close mirror with FOB
Delayed mirror close to 300ms
Driving halos to 50%
Radio/Nav off with open door
Door handle LED while backing
Emergency brake mode to blinking
DVD and Video Format settings
Removed disclaimers
Changed startup logo
Edited office message settings
Added TPMS settings
Added Google local voice search
Added digital speed
GPS Sync for clock
Unlock doors when engine off
Own ring tone

Now time to go drive it

how did you switch 6nh to 6ns enhanced blue tooth? My car has no tech package or enhanced bluetooth, just the basic idrive and basic bluetooth. my voice command option doesn't seem to be activated but i'm trying to figure out how to activate that feature and the others of bluetooth enhanced. is that possible?

Almaretto · 10-13-2016, 10:45 PM

Quote:

Originally Posted by Tano22

how did you switch 6nh to 6ns enhanced blue tooth? My car has no tech package or enhanced bluetooth, just the basic idrive and basic bluetooth. my voice command option doesn't seem to be activated but i'm trying to figure out how to activate that feature and the others of bluetooth enhanced. is that possible?

Check the op for tutorials explaining fdl- and vo-coding.

Tano22 · 10-13-2016, 10:53 PM

Quote:

Originally Posted by Almaretto

Check the op for tutorials explaining fdl- and vo-coding.

i did, i was referring to the cheat sheet. i didn't see that :/ I'll take a closer look. TY

Almaretto · 10-13-2016, 11:08 PM

Quote:

Originally Posted by Tano22

i did, i was referring to the cheat sheet. i didn't see that :/ I'll take a closer look. TY

The F30 Cheat Sheet goes over VO coding, but most other ones only cover FDL coding. 6NH to 6NS is changing an FA and VO coding.

PM'd Guides.

isthar · 10-14-2016, 10:41 AM

Emergency brake mode to blinking

hmm maybe I should do that...

anybody ever found a way to tell the bmw online news reading app to let you read the whole article when vehicle in motion? (the voice transcript thing is... just too funny to listen to)

Almaretto · 10-14-2016, 12:58 PM

Quote:

Originally Posted by isthar

Emergency brake mode to blinking

hmm maybe I should do that...

anybody ever found a way to tell the bmw online news reading app to let you read the whole article when vehicle in motion? (the voice transcript thing is... just too funny to listen to)

Only with hardware mod to fool GPS into thinking car is not moving.

alkadraz · 10-17-2016, 10:53 AM

Hello guys. As a newbie to this coding this, i have two questions for you.

1) What should i code to use rear led taillights as indicating lights instead of regular yellow lights? I suppose that's how US cars' indicators work.
2) What to code for xenons for welcome lights?

Thanks in advance.

Rommel42 · 10-17-2016, 07:00 PM

Quote:

Originally Posted by Beartato

Totally worked brotato chip, thanks.

Where exactly do I find this setting? So far I had no luck.Would really like to get rid of it.

_Rommel42

Almaretto · 10-17-2016, 07:05 PM

Quote:

Originally Posted by Rommel42

Where exactly do I find this setting? So far I had no luck.Would really like to get rid of it.

_Rommel42

Do you have option code 845 Acoustic Belt Warning? Usually, that sets the following:

<<< CAFD_00000909.caf.004_005_001 (ACSM_4C) >>>
ACSM_4C > Ausstattungsflags 3000 > Initialwarnung_GWF_IW = aktiv

BentZero · 10-18-2016, 11:57 AM

my friend has a 2017 F30. Will the same settings in the cheatsheet work on that car as well?

pikcachu · 10-18-2016, 12:10 PM

Quote:

Originally Posted by BentZero

my friend has a 2017 F30. Will the same settings in the cheatsheet work on that car as well?

F22 and F30 are quite similar... most of the stuff should be the same

Rommel42 · 10-18-2016, 08:21 PM

Quote:

Originally Posted by Almaretto

Do you have option code 845 Acoustic Belt Warning? Usually, that sets the following:

<<< CAFD_00000909.caf.004_005_001 (ACSM_4C) >>>
ACSM_4C > Ausstattungsflags 3000 > Initialwarnung_GWF_IW = aktiv

Just checked my FA,yes I have code 845.More coding for the weekend.
Thanks again,Almaretto.

_Rommel42

Almaretto · 10-18-2016, 09:44 PM

Quote:

Originally Posted by Rommel42

Just checked my FA,yes I have code 845.More coding for the weekend.
Thanks again,Almaretto.

_Rommel42

Benzima · 10-21-2016, 12:57 PM

Anyone can send me the latest software and cheat sheet (in PDF or Excel)? I will start coding tonight my F87.

Thanks in advance for your help!

Almaretto · 10-21-2016, 05:59 PM

Quote:

Originally Posted by Benzima

Anyone can send me the latest software and cheat sheet (in PDF or Excel)? I will start coding tonight my F87.

Thanks in advance for your help!

Software sent in PM. Cheat Sheets - check OP or BMW Coding Database.

simsimma777 · 10-26-2016, 11:57 AM

I couldn't find this mentioned anywhere, but if you change the below werte values to 00, camera and PDC will stay on indefinitely until manually disabled.

This is as opposed to using FF as the werte value, which will automatically turn off camera and PDC once max distance of 255 meters is driven.

REM----> 3203 D_SCHWELLE_2
REM----> 3203 D_SCHWELLE_1

In addition to the above, you still have to code the speed parameters to werte FF to get this to work.

simsimma777 · 10-26-2016, 12:14 PM

Quote:

Originally Posted by Rommel42

Very informative indeed.So,if I understand you right,as long as I'm buckled,I could open the drivers door,and drive in reverse for what ever reason.And the trans should not go into park,am I right?
Any idea,if somebody has looked into possible coding on this at all?It is not a must have feature,but than again I would not mind changing the value to my
likens.
Thanks again for your always helpful input.

I'm not sure about the coding aspect, but the trick the SAs at my dealership taught me is to keep the brake pedal slightly pressed down.

This will allow the car to roll with the door open regardless of seatbelt.

Reid · 10-26-2016, 08:23 PM

Quote:

Originally Posted by alkadraz

Hello guys. As a newbie to this coding this, i have two questions for you.

1) What should i code to use rear led taillights as indicating lights instead of regular yellow lights? I suppose that's how US cars' indicators work.

The North American cars have different hardware in the tail lights. The turn signal lights are simply red in North America, instead of yellow like the rest of the world.

Rommel42 · 10-26-2016, 11:31 PM

Quote:

Originally Posted by ballinisahabit

I'm not sure about the coding aspect, but the trick the SAs at my dealership taught me is to keep the brake pedal slightly pressed down.

This will allow the car to roll with the door open regardless of seatbelt.

Thanks for the info.Good to know.if ever wanted to drive the rear of the car onto ramps.Still would be nice to code it out.

_Rommel42

AlpsRider · 10-27-2016, 11:31 AM

Quote:

Originally Posted by Reid

The North American cars have different hardware in the tail lights. The turn signal lights are simply red in North America, instead of yellow like the rest of the world.

I have a US spec car which has red color turn signal plastic. I was able to change the color emitted to yellow by installing a bright yellow LED even though the plastic is red. I suppose you could do the opposite by changing your bulbs to bright red LED. I ended up installing red LEDs for my rear turn signals, that is the way BMWs are sold in the US.

Reid · 10-27-2016, 04:49 PM

Quote:

Originally Posted by AlpsRider

I have a US spec car which has red color turn signal plastic. I was able to change the color emitted to yellow by installing a bright yellow LED even though the plastic is red. I suppose you could do the opposite by changing your bulbs to bright red LED. I ended up installing red LEDs for my rear turn signals, that is the way BMWs are sold in the US.

The question was if coding was the way to change the turn signals from yellow to red.

The answer is that it must be done through hardware changes, not coding.

AlpsRider · 10-28-2016, 11:42 AM

Quote:

Originally Posted by Reid

The question was if coding was the way to change the turn signals from yellow to red.

The answer is that it must be done through hardware changes, not coding.

"1) What should i code to use rear led taillights as indicating lights instead of regular yellow lights? I suppose that's how US cars' indicators work."

The quote was this ^. He apparently wants to have red turn signals with a car that has yellow turn signal lenses, I interpreted it as he thought he could code the car to change which lights were used as turn signals, but the lights used as turn signals can't be changed. It is possible change the bulb in the turn signal light to a bright red LED which would achieve his ultimate goal. The red LED would override the yellow color of the turn signal lens.
I was just trying to help him achieve his ultimate goal.

10-14-2016, 10:41 AM	#1611
isthar Second Lieutenant 60 Rep 273 Posts Drives: M235i xDrive Join Date: May 2015 Location: Boston, USA iTrader: (0)	Emergency brake mode to blinking hmm maybe I should do that... anybody ever found a way to tell the bmw online news reading app to let you read the whole article when vehicle in motion? (the voice transcript thing is... just too funny to listen to) __________________ //M235ix Alpine White
	Appreciate 0 Quote

10-17-2016, 10:53 AM	#1613
alkadraz New Member 0 Rep 7 Posts Drives: 2015 F22 Join Date: Oct 2016 Location: - iTrader: (0)	Hello guys. As a newbie to this coding this, i have two questions for you. 1) What should i code to use rear led taillights as indicating lights instead of regular yellow lights? I suppose that's how US cars' indicators work. 2) What to code for xenons for welcome lights? Thanks in advance.
	Appreciate 0 Quote

10-18-2016, 11:57 AM	#1616
BentZero Lieutenant Colonel 625 Rep 1,753 Posts Drives: 6MT Mineral White M235i Join Date: Oct 2015 Location: Charleston, SC iTrader: (2)	my friend has a 2017 F30. Will the same settings in the cheatsheet work on that car as well? __________________ I rev-match from neutral to first 6MT Mineral White on black M235i coupe Build thread
	Appreciate 0 Quote

10-21-2016, 12:57 PM	#1620
Benzima Colonel 1324 Rep 2,924 Posts Drives: 2017 BMW M2 Join Date: Nov 2015 Location: Montreal, CANADA iTrader: (0)	Anyone can send me the latest software and cheat sheet (in PDF or Excel)? I will start coding tonight my F87. Thanks in advance for your help! __________________ BMW ///M Club Montreal BMW ///M Club Montreal Facebook Page
	Appreciate 0 Quote

10-26-2016, 11:57 AM	#1622
simsimma777 Private First Class 59 Rep 100 Posts Drives: 2019 M850i coupe Join Date: Mar 2016 Location: US iTrader: (0)	I couldn't find this mentioned anywhere, but if you change the below werte values to 00, camera and PDC will stay on indefinitely until manually disabled. This is as opposed to using FF as the werte value, which will automatically turn off camera and PDC once max distance of 255 meters is driven. REM----> 3203 D_SCHWELLE_2 REM----> 3203 D_SCHWELLE_1 In addition to the above, you still have to code the speed parameters to werte FF to get this to work.
	Appreciate 1 MerlinPurple687.50 Quote