09-15-2023, 06:42 AM | #1 |
Second Lieutenant
230
Rep 224
Posts |
Ceramic Removal or whatever it is
Used white car
When looking at angle with sun just there you can see streaks that looks like a coating was put on uneven or to sparsely/thin in a wipe formation. I would like to remove it all and just wax it. Nothing I have tried so far touches it. Any Ideas what a plan would be for a very in-experience car finish guy. Hap |
09-15-2023, 02:09 PM | #2 |
Major
347
Rep 1,016
Posts |
I'd try a clay bar first. It is hard to mess up anything with that.
If that does not work you will probably need to use an abrasive compound and a power tool, and that will depend on your skill/comfort level. |
Appreciate
0
|
04-09-2024, 06:23 AM | #3 |
Second Lieutenant
230
Rep 224
Posts |
Clay
I tried the clay bar and still have the streaks. I am guessing is some sort of Ceramic coating that wasn't put on great or its been there a long time. Its a 2018 car. I am going to take to a detailer to get estimate to strip it down to paint and I just want to wax it.
Nothing I tried touches the problem. Hap |
Appreciate
0
|
04-09-2024, 07:10 PM | #4 |
Colonel
990
Rep 2,200
Posts |
Most professional specialists agree that using an orbital polisher with a polishing compound is the best way to remove a ceramic coating. Because polishing may essentially "cut" through the resistive coating until the clear coat is reached, it is by far the simplest method. However, this requires knowledge of polishing techniques and the ability to know when one has successfully cut through the ceramic coating, but has not penetrated too deeply into the underlying transparent layer.
__________________
____________________________________________
2015 BMW 228i in EstorilBlau II Metallic / Terra Dakota Leather - 6-speed manual, M Sport Package, Cold Weather Package, Lighting Package, Premium Package, Harman Kardon premium sound, Anti-theft alarm system, Blue Metallic Matt Accent Moldings, Aluminum Hexagon Interior Strips, Anthracite Headlining |
Appreciate
0
|
04-14-2024, 10:38 PM | #5 | |
Private
108
Rep 79
Posts |
Quote:
After that, you'll need to attack it mechanically, as you've tried. But be aware that you're removing a solid. So what happens is it will load up onto the polishing pad that you're using. Then you're just grinding it into the paint, which can introduce more imperfections. The key here is controlling the contamination on the pad to avoid that. Use some compressed air to blow the dust off the pad often. What kind of polisher, pad, and product have you been using to try and remove this? |
|
Appreciate
0
|
04-15-2024, 04:33 AM | #6 | |
Second Lieutenant
230
Rep 224
Posts |
Thanks for response
Quote:
Hap |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|