05-28-2018, 11:49 AM | #1 |
Major General
5589
Rep 5,386
Posts |
3.5" BMS tips on MP exhaust and MP diffuser
I have gotten a few questions about how I mounted the BMS slip-fit tips on my MP exhaust even though BMS says they don't fit. The reality is they do fit, they just fit a lot tighter than the OEM slip-fit tips. The prongs on the BMS tips need to be flattened slightly and then slowly worked on, making sure all the prongs are biting. It takes some muscle and patience, but they'll go on. I was able to mount them in about 10 minutes.
Here's a pic of the tips with my MP diffuser.
__________________
The forest was shrinking, but the Trees kept voting for the Axe, for the Axe was clever and convinced the Trees that because his handle was made of wood, he was one of them.
Last edited by XutvJet; 05-28-2018 at 11:59 AM.. |
05-30-2018, 01:16 AM | #3 |
Major
526
Rep 1,078
Posts |
Thanks for sharing. I wasn't able to get the clips to bite when I tried awhile back, must've been my technique. In the end, I was able to pull them off without much effort so they were definitely not secured for me. Looks like they stick out just enough for the diffuser. Looks good.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|