02-17-2017, 12:11 PM | #67 |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
Called them Wednesday I believe it was and they said that the tail section is done, they're just waiting on the midpipe.
I'm assuming the delay was partially my fault because I called them and switch to a resonated midpipe instead of the race one. But that was 2 weeks ago as well. They said that everything should ship by the end of next week. We'll see. I'm eager to get the exhaust up. |
02-20-2017, 06:57 PM | #68 | |
First Lieutenant
102
Rep 303
Posts |
Quote:
I want a LOUD DEEP sound but i don't want that obnoxious and raspy trashcan-like sound of some exhaust systems and i don't want drone neither. I had the MPE in my previous M235i and it was great. The new MPE for the M240i it's not so good. My car is stock and i'd like to preserve the stock DP with just a piggyback like Dinantronics Sport when they make it work properly ! Considering all that.... 1. Which front section (midpipe) would you buy ? Resonated or non-resonated ?? 2. Do you think the resonated version would be too quiet since it comes with an "ECC homologation" (maybe the new EU noise rule) ? 3. The ECU operated included valve in the system is enough to reduce or cancel drone in comfort mode in case i buy the non-resonated version ? Thanks for your time. |
|
Appreciate
0
|
02-20-2017, 07:00 PM | #69 | |
Joint Chiefs of Staff
24199
Rep 190,807
Posts |
Quote:
catless DP ->res 2- With stock DP, res might be too quiet for most users 3- We never got any drone complaint with REMUS systems
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
1
AlexM240i101.50 |
02-20-2017, 11:47 PM | #70 |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
|
Appreciate
3
|
02-21-2017, 10:35 AM | #72 |
Brigadier General
1779
Rep 4,516
Posts |
M240i with 200CPI DP and CBE exhaust from BCS here in the UK - valved system - valve closed at <part throttle and flow goes through rear muffler and out both LH and RH pipes. WOT valve opens to bypass muffler and flow exits RH pipe only...
Taken from this BabyBMW thread http://www.babybmw.net/forum/viewtopic.php?f=74&t=95924
__________________
Fettled M135i EB AT then AW M2 DCT - both gone but not forgotten:
Current '22 X3M LCI.. |
Appreciate
1
AlexM240i101.50 |
02-21-2017, 12:26 PM | #73 | |
Joint Chiefs of Staff
24199
Rep 190,807
Posts |
Quote:
Sound will not be that loud unless you are going wide open throttle
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
|
Appreciate
0
|
02-21-2017, 04:30 PM | #74 | |
First Lieutenant
102
Rep 303
Posts |
Quote:
I don't like that setup. It sounds cheap an raspy. No deep tone like BMW should sound. |
|
Appreciate
0
|
02-26-2017, 08:14 AM | #75 |
Enlisted Member
14
Rep 44
Posts |
Hey Guys!
I don't own a M240i but a M140i which is technically the same engine (B58) with same output. I just looked up for a new exhaust, found out about Remus and searched for an exhaust for my M140i. The problem is: Remus does not show one on their website! So I looked up the AC Schnitzer website - and look: they offer an exhaust for my car! So I looked for the price: 2400 EUR!*(about 2535 USD) And their EG-certificate (in German called "EG-Erlaubnis" or "EG-Bescheinigung" which means it is street legal within EU) shows: Manufacturer is Remus! And the certificate is for both M140i and M240i - so every installed part is the same! So I looked up the install instructions from AC Schnitzer - and they are the same. My plan is now to get the technically same exhaust from Remus for about 1700 EUR instead of 2400 EUR for an AC Schnitzer-labeled Remus-one. To do this I'm searching for the original Remus EG-certificate. Could you provide it if you receive your exhaust? Joe240 Would be great! I also would love to hear the sound if the exhaust is installed on your car! Thank you very much in advance! Cheers |
Appreciate
0
|
02-26-2017, 08:23 AM | #76 |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
Not a problem GDLF. When I get the exhaust I'll be sure to look for the certification in the box. Got the tracking number on Friday. 2 separate shipments through DPD (their website shows they've only received the information, not the products so we'll see). Hoping to get it by the end of this Friday at the latest (Austria isn't too far from Germany). I'll try to get a decent video of the exhaust before and after, but most videos of exhausts never really do them justice.
|
02-27-2017, 07:55 AM | #77 | |
First Lieutenant
102
Rep 303
Posts |
Quote:
What is that EG certificate ? Is the same ECC homologation ?? It means the system is quiet enough for the EU ? Last edited by AlexM240i; 02-28-2017 at 06:59 AM.. |
|
Appreciate
1
Joe2402925.00 |
02-28-2017, 02:40 AM | #79 | |
Enlisted Member
14
Rep 44
Posts |
Quote:
Joe240 Remus has now already answered my e-mail and sent me the Certificates for the M240i, stating they have to "check the fitment with an M140i". The certificate is the same as the AC Schnitzer one, including the M140i For the certificate the Exhaust had to be fitted so I think it's a contract-thing with AC Schnitzer that Remus is not allowed to sell it for the M140i. So I will order the same exhaust system as you did! Still looking forward to a sound file/video if it's installed on your M240 Cheers |
|
Appreciate
1
AlexM240i101.50 |
02-28-2017, 06:49 AM | #80 |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
Still haven't received it yet unfortunately. Tracking shows it's in southern Germany at the moment so assuming Wednesday through Friday delivery.
|
Appreciate
0
|
02-28-2017, 07:05 AM | #81 |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
Scratch that, it's in Aschaffenburg near Frankfurt.
|
02-28-2017, 11:15 PM | #83 |
New Member
37
Rep 16
Posts |
just ordered this last week.
https://www.akrapovic.com/#!/car/pro...34&yearId=4620 Hopefully it will here in a month time! |
Appreciate
1
Joe2402925.00 |
03-01-2017, 05:00 AM | #84 |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
You must have friends at DPD because tracking shows that it's out for delivery today Waiting impatiently for the delivery driver to come. Hopefully it's before I have to go to work, otherwise my wife will be home to take delivery.
|
03-01-2017, 05:01 AM | #85 | |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
Quote:
|
|
Appreciate
1
AlexM240i101.50 |
03-01-2017, 06:11 AM | #86 | |
First Lieutenant
102
Rep 303
Posts |
Quote:
Is it too much to ask for detailed photos and before-after videos ??? |
|
03-01-2017, 07:46 AM | #87 |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
Never to much to ask for that was gonna do a before audio earlier, but realized the back of the car is pretty dirty from the constant rain we've been getting. I'll be sure to get one though before the new exhaust goes on this weekend.
|
Appreciate
1
AlexM240i101.50 |
03-01-2017, 09:00 AM | #88 |
Major
2925
Rep 1,303
Posts
Drives: 2021 C8 Corvette 1LT
Join Date: Jul 2016
Location: Pensacola
|
Exhaust came in a little bit ago. Unfortunately I'm at work so pictures will be put up tonight. Wife facetimed me so we can make sure everything was there. The one box was open when it was delivered and it also had a foot print on it (gotta love delivery companies). Everything appears to be there and in great condition. Again, pictures will be up tomorrow. Might wash the car tomorrow morning as well so I can do a before and after video.
|
Post Reply |
Bookmarks |
|
|