M performance Diffuser imperfections

335pilot · 05-20-2016, 08:11 PM

I ordered from a different vendor, and will have it next week. I will update when I get it.

Xiaoxi · 05-20-2016, 09:57 PM

Quote:

Originally Posted by Drpoomanchu

Please do... Sun motors is where both of mine came from and he apparently has had multiple diffusers come in with these similar problems. Hopefully you get luckier than I.

Damn...wish I brought this up before buying yesterday. Are you being reimbursed for return shipping?

Drpoomanchu · 05-20-2016, 11:46 PM

Yes, Brian Keller in parts is very helpfull and has been trying to get this resolved. He sent a second diffuser no questions asked and sent a return shipper for the first diffuser. Im sure he would be willing to work with you, after all he is aware of this issue.

Xiaoxi · 05-21-2016, 01:30 AM

That's good. Hopefully he's proactive enough to check this since it's such a problem.

Drpoomanchu · 05-21-2016, 02:11 PM

Quote:

Originally Posted by Xiaoxi

That's good. Hopefully he's proactive enough to check this since it's such a problem.

TBH im suprised they shipped you one unless it was before this whole issue went full circle. Maybe another parts guy shipped one unknowingly. Im hoping your not in the same boat as myself.

Xiaoxi · 05-21-2016, 02:37 PM

I missed the delivery today... ugh it required a signature. I'll have to wait until Monday to find out.

Drpoomanchu · 05-24-2016, 05:16 PM

Quote:

Originally Posted by Xiaoxi

I missed the delivery today... ugh it required a signature. I'll have to wait until Monday to find out.

You find anything out yet..?

Xiaoxi · 05-24-2016, 08:57 PM

Quote:

Originally Posted by Drpoomanchu

You find anything out yet..?

Sorry for the delay. Just got home and it finally got here.

Thankfully, it's fine. Just a little dusty, but no scratch/mold marks.

Drpoomanchu · 05-24-2016, 09:59 PM

Quote:

Originally Posted by Xiaoxi

Sorry for the delay. Just got home and it finally got here.

Thankfully, it's fine. Just a little dusty, but no scratch/mold marks.

Ok. Good. Glad you didnt have the same issue i have. I spoke to brian on Monday and he said they got more diffusers that looked perfect. Im awaiting delivery so will post the results... Everyone cross something for your boy

Xiaoxi · 05-24-2016, 10:23 PM

Quote:

Originally Posted by Drpoomanchu

Ok. Good. Glad you didnt have the same issue i have. I spoke to brian on Monday and he said they got more diffusers that looked perfect. Im awaiting delivery so will post the results... Everyone cross something for your boy

Good luck!

Xiaoxi · 05-24-2016, 11:05 PM

crap, I spoke too soon. I thought it would be very noticeable so didn't see anything at first. Was in a rush. But upon closer inspection the mold lines are there.

However, I don't have the energy make a return. It's a very small flaw. Hope you get a perfect one.

wakemcs · 05-25-2016, 09:21 AM

Quote:

Originally Posted by Xiaoxi

crap, I spoke too soon. I thought it would be very noticeable so didn't see anything at first. Was in a rush. But upon closer inspection the mold lines are there.

However, I don't have the energy make a return. It's a very small flaw. Hope you get a perfect one.

It might worth the time to put in a phone call ask for a partial refund..

Drpoomanchu · 05-25-2016, 08:08 PM

Quote:

Originally Posted by wakemcs

It might worth the time to put in a phone call ask for a partial refund..

I have to agree, sun motor cars is a stand up group and will at the very least send you a diffuser until its right.. They are selling these just above cost so not sure on the margain for refunding but you should at least call them and let them know about the imperfections so they can get that straightened out for future customers.

335pilot · 05-28-2016, 03:17 PM

I said I would update when I received mine. It seems to have the same "mold/tooling" lines as the OP, above both exhaust cutouts. Very faint though. Must be a mfg issue not specific to any vendor.

Drpoomanchu · 05-28-2016, 11:01 PM

Quote:

Originally Posted by 335pilot

I said I would update when I received mine. It seems to have the same "mold/tooling" lines as the OP, above both exhaust cutouts. Very faint though. Must be a mfg issue not specific to any vendor.

Thats too bad, does it bother you enough to return it..? The first two i got were just plain unacceptable to me. I have received my 3rd and im throwing in the towel.. He found me a near perfect one so im keeping it... It still has a few minor flaws but unfortunately this may be as good as it gets. Im just floored that such an expensive peice of plastic could have so many flaws.

siwo · 05-29-2016, 05:51 AM

Quote:

Originally Posted by Drpoomanchu

I like your ramp! Looks DIY and reliable. I may fabricate something similar!

Drpoomanchu · 05-29-2016, 08:00 PM

Quote:

Originally Posted by siwo

I like your ramp! Looks DIY and reliable. I may fabricate something similar!

Absolutley..! They work very nicely.. I just put old floor mats underneath them for the initial bite so they dont slide. Once you get weight on the front your golden. Im on low pros in the front tho, stock tires should creep up fine depending on what you have.. If you want PM me and i can get you measurements. I did some heavy math and my calculations were perfect.

My m performance splitter clears perfectly with a Dinan drop.

Xiaoxi · 05-31-2016, 11:15 AM

I've emailed Brian to let him know about the defect:

#################
Hey Brian,

Wanted to raise some awareness on a molding issue with the M235i diffuser. I believe you may already be familiar with the situation, but here is a thread which documents the problem:

http://www.2addicts.com/forums/showthread.php?t=1262239

It appears that the molding defect stems from manufacturing and affects many distributors, including Sun Motors. Just wanted to confirm that the diffuser that I received also has the "scratch mark" documented in the forum thread, but it's not as pronounced as the thread pictures. You may want to let future buyers know in advance or have the warehouse team check prior to shipping.

Thanks,
Xiaoxi
####################

Edit:

Update: Brian and I have reached an agreeable resolution. I want to thank him for providing excellent service and fully recommend Sun Motor Cars for future purchases.

Drpoomanchu · 08-10-2017, 06:00 PM

Sorry guys, Photobucket sucks

335pilot · 08-13-2017, 12:17 PM

Quote:

Originally Posted by Drpoomanchu

Sorry guys, Photobucket sucks

As a follow up on this, several months ago I saw a privately owned M235i Racing, and the rear diffuser had the same marks as mine. Obviously the same part, but the marks were present even on that car.

Drpoomanchu · 08-13-2017, 08:51 PM

Quote:

Originally Posted by 335pilot

Quote:

Originally Posted by Drpoomanchu

Sorry guys, Photobucket sucks

As a follow up on this, several months ago I saw a privately owned M235i Racing, and the rear diffuser had the same marks as mine. Obviously the same part, but the marks were present even on that car.

Good lookin out. They must be using bad molds or are careless in the process. I think it took 3 shipments before I got one I felt ok with. I understand that there is potential for this to happen in the molding process but for there to be perfect pieces and for others to be clearly lemons there is something out of wack.

05-20-2016, 08:11 PM	#23
335pilot Private 21 Rep 60 Posts Drives: 2015 M235, 2008 335i, 2008 X5 Join Date: Feb 2011 Location: tx iTrader: (0)	I ordered from a different vendor, and will have it next week. I will update when I get it.
	Appreciate 0 Quote

05-20-2016, 11:46 PM	#25
Drpoomanchu Captain 308 Rep 647 Posts Drives: AW M235i Man FBO Join Date: Aug 2015 Location: Ohio iTrader: (0)	Yes, Brian Keller in parts is very helpfull and has been trying to get this resolved. He sent a second diffuser no questions asked and sent a return shipper for the first diffuser. Im sure he would be willing to work with you, after all he is aware of this issue.
	Appreciate 1 Quote

05-21-2016, 01:30 AM	#26
Xiaoxi Lieutenant 269 Rep 470 Posts Drives: a Miata Join Date: Jul 2014 Location: DC metro iTrader: (0)	That's good. Hopefully he's proactive enough to check this since it's such a problem. __________________ 2015 M235i \| AW \| 6MT \| Tech \| Heated Seat \| Parking Assist \| Fabspeed DP & Muffler Delete \| Apex PS7s 1999 MX5 NB \| Emerald Mica \| 5MT \| Sport Edition \| Kosei K5Rs \| Heated Rear Glass ig: @bee2ven
	Appreciate 0 Quote

05-21-2016, 02:37 PM	#28
Xiaoxi Lieutenant 269 Rep 470 Posts Drives: a Miata Join Date: Jul 2014 Location: DC metro iTrader: (0)	I missed the delivery today... ugh it required a signature. I'll have to wait until Monday to find out. __________________ 2015 M235i \| AW \| 6MT \| Tech \| Heated Seat \| Parking Assist \| Fabspeed DP & Muffler Delete \| Apex PS7s 1999 MX5 NB \| Emerald Mica \| 5MT \| Sport Edition \| Kosei K5Rs \| Heated Rear Glass ig: @bee2ven
	Appreciate 0 Quote

05-24-2016, 11:05 PM	#33
Xiaoxi Lieutenant 269 Rep 470 Posts Drives: a Miata Join Date: Jul 2014 Location: DC metro iTrader: (0)	crap, I spoke too soon. I thought it would be very noticeable so didn't see anything at first. Was in a rush. But upon closer inspection the mold lines are there. However, I don't have the energy make a return. It's a very small flaw. Hope you get a perfect one. __________________ 2015 M235i \| AW \| 6MT \| Tech \| Heated Seat \| Parking Assist \| Fabspeed DP & Muffler Delete \| Apex PS7s 1999 MX5 NB \| Emerald Mica \| 5MT \| Sport Edition \| Kosei K5Rs \| Heated Rear Glass ig: @bee2ven
	Appreciate 0 Quote

05-28-2016, 03:17 PM	#36
335pilot Private 21 Rep 60 Posts Drives: 2015 M235, 2008 335i, 2008 X5 Join Date: Feb 2011 Location: tx iTrader: (0)	I said I would update when I received mine. It seems to have the same "mold/tooling" lines as the OP, above both exhaust cutouts. Very faint though. Must be a mfg issue not specific to any vendor.
	Appreciate 0 Quote

05-31-2016, 11:15 AM	#40
Xiaoxi Lieutenant 269 Rep 470 Posts Drives: a Miata Join Date: Jul 2014 Location: DC metro iTrader: (0)	I've emailed Brian to let him know about the defect: ################# Hey Brian, Wanted to raise some awareness on a molding issue with the M235i diffuser. I believe you may already be familiar with the situation, but here is a thread which documents the problem: http://www.2addicts.com/forums/showthread.php?t=1262239 It appears that the molding defect stems from manufacturing and affects many distributors, including Sun Motors. Just wanted to confirm that the diffuser that I received also has the "scratch mark" documented in the forum thread, but it's not as pronounced as the thread pictures. You may want to let future buyers know in advance or have the warehouse team check prior to shipping. Thanks, Xiaoxi #################### Edit: Update: Brian and I have reached an agreeable resolution. I want to thank him for providing excellent service and fully recommend Sun Motor Cars for future purchases. __________________ 2015 M235i \| AW \| 6MT \| Tech \| Heated Seat \| Parking Assist \| Fabspeed DP & Muffler Delete \| Apex PS7s 1999 MX5 NB \| Emerald Mica \| 5MT \| Sport Edition \| Kosei K5Rs \| Heated Rear Glass ig: @bee2ven Last edited by Xiaoxi; 05-31-2016 at 01:28 PM..
	Appreciate 0 Quote

08-10-2017, 06:00 PM	#41
Drpoomanchu Captain 308 Rep 647 Posts Drives: AW M235i Man FBO Join Date: Aug 2015 Location: Ohio iTrader: (0)	Sorry guys, Photobucket sucks
	Appreciate 0 Quote