[dubz]

I’m having the most difficult time finding wheels for my m235i down to niche DFS 18x8 et +40 or a set of sparco podio 18x8 et +45
I wanted to stagger the wheels but I can’t find any 8.5 or 9.5 to do it so I’m thinking of going 245 all the way around any one know if they’ll rub up front ? Or y’all think I can get away with doing 235/40 r18 front and 255/40 r18 rear. Send help man I’m lost af lol

[MechEngineer]

I'm running a 245 square set up for my 235i xdrive. I use the stock rear 18's in the front, I bought a spare set from a junkyard. I have VAC camber plates in the front and a 12mm spacer.

[Dom147]

245/35 will fit without any rubbing on an 8.5" wheel with an effective offset of anything from ET35-40 but you will need additional camber of at least 1.5 degrees.

[Kernel Kurtz]

I'm running 245/35 on 18x8 ET40 all around. Stock suspension. No problem.

https://www.2addicts.com/forums/show...0&postcount=39

[dubz]

I found a set that are 18x8.5 and 18x9.5 et 35 all the way around yall think I’m good? Firehawk indy tires 225/40 & 245/40

[JMcLellan]

Originally Posted by dubz

I found a set that are 18x8.5 and 18x9.5 et 35 all the way around yall think I’m good? Firehawk indy tires 225/40 & 245/40

The rear offset for 9.5 inch wheels should be much higher. If not you may have a little too much wheel poke. The fitment guide I used recommended et58 for 9.5 inch wheels in the rear.

[dubz]

So I got the 18x8.5 and 18x9.5 on et +35 fitted on the m235i they’re bronze with the v spokes no rub fit just right. Ngl all the diff answers had me worried 😅