[BentZero]

installed these

[BentZero]

Originally Posted by SF-Medic-514

Hello, I’m new to this website/forum and not quite sure if this the appropriate sub-section. I have completed all Dinan (Stage IV) performance mods to my 2016 Black Sapphire BMW M235ix (F22) and looking to add some final aesthetic mods. Specifically I am looking for Blacked-Out/”Murdered” Roundels for hood/trunk/wheels/steering and Blacked-out Dinan-4 and M emblems. I have seen them but cannot find where to purchase or the associated www does not work. Cost not a consideration (within reason). I desire professionally engineered parts for direct-fit. I am not interested in a do-it-yourself spray-paint-dipped/paste-on sticker. Please let me know where to find via reply or pm, Thanks!

I got the black emblems in my post above this one from a forum member, but you can get them from IND. They have gloss or matte black.

http://ind-distribution.com/ind/brands/ind

[SerenVoX]

Originally Posted by SF-Medic-514

Hello, I’m new to this website/forum and not quite sure if this the appropriate sub-section. I have completed all Dinan (Stage IV) performance mods to my 2016 Black Sapphire BMW M235ix (F22) and looking to add some final aesthetic mods. Specifically I am looking for Blacked-Out/”Murdered” Roundels for hood/trunk/wheels/steering and Blacked-out Dinan-4 and M emblems. I have seen them but cannot find where to purchase or the associated www does not work. Cost not a consideration (within reason). I desire professionally engineered parts for direct-fit. I am not interested in a do-it-yourself spray-paint-dipped/paste-on sticker. Please let me know where to find via reply or pm, Thanks!

There are full black roundels here. http://www.jbspeed.com/f22/

[SF-Medic-514]

Thanks!!!!

[raleedy]

Originally Posted by BentZero

installed these

Those would look nice on my Mineral White 6MT 228i!

But, all seriousness aside, what I did to my 2-series today was to stuff 4 mounted winter tires into the passenger compartment and trunk so I can take them in to get them mounted for the "cold" season.

[BentZero]

Originally Posted by raleedy

Those would look nice on my Mineral White 6MT 228i!

Mine is mineral white too. Beautiful color and the black emblems are a subtle yet nice improvement. Goes well with my dark tint and orbit rims.

[SF-Medic-514]

Thanks for the replys, everything ordered! Will post pics when complete.

[BEM-S4]

Originally Posted by raleedy

Those would look nice on my Mineral White 6MT 228i!

But, all seriousness aside, what I did to my 2-series today was to stuff 4 mounted winter tires into the passenger compartment and trunk so I can take them in to get them mounted for the "cold" season.

That's the one thing I miss about my coupe. Can't do that with a convertible!

[Rayscott]

I cleaned tons of tar from my 228ix which took me 3 hours. We got our final road topping this week. They only did 1/2 of our street so the other side was ok to drive on. They said the other side would be done the next day. So I went out for a couple of hours and when I returned I drove down the unpaved side of our street. However, the f---ing road workers decided to pave it the same day and put down the tack which helps the road tar adhere to it. However, they did not notify anyone nor did they have someone or signage warning not to ride on it. I pulled in my garage, got out and saw tar tack all over my driveway, in my garage, on my tires and lower panels. I went ballistic and found the foreman who decided to do this. He was a dumb f----ing redneck who tells me I can go to Lowes and get this shit called PB which should take it up. Well, Lowes never heard of it. I had to get it off before it set up so I doused it with gas and used a product called tarminator which I use for my detailing business. It took me 6 hours to get most of it off my garage floor and driveway. Today I got it off the 228, it got off the tires after driving it for a day or two. Unbelieveable that these idiots didn't warn anyone.

[raleedy]

Originally Posted by BEM-S4

That's the one thing I miss about my coupe. Can't do that with a convertible!

And I can't put my top down.

[Dylan86]

Final detail of the year, and into storage.

2x Hand Wash + Clay
Engine Bay Detail
Interior Detail
Wheels/barrels cleaned off car
De-greased and shampoo'd the wheel wells (I'm sick, I know) Looks new again!
Power washed the underbelly, which was in surprisingly good shape
Detailed the calipers with a tooth brush, emery cloth/aluminum cleaner to the rotor hats.

Tis the SKI'son!

[BEM-S4]

Originally Posted by raleedy

And I can't put my top down.

Definitely a trade off I happily made! Only downside is dad has to bring wheels and tires for me in his car. Not really a problem just someone else's schedule to consider.

[SteveInfante]

Originally Posted by Rayscott

I cleaned tons of tar from my 228ix which took me 3 hours. We got our final road topping this week. They only did 1/2 of our street so the other side was ok to drive on. They said the other side would be done the next day. So I went out for a couple of hours and when I returned I drove down the unpaved side of our street. However, the f---ing road workers decided to pave it the same day and put down the tack which helps the road tar adhere to it. However, they did not notify anyone nor did they have someone or signage warning not to ride on it. I pulled in my garage, got out and saw tar tack all over my driveway, in my garage, on my tires and lower panels. I went ballistic and found the foreman who decided to do this. He was a dumb f----ing redneck who tells me I can go to Lowes and get this shit called PB which should take it up. Well, Lowes never heard of it. I had to get it off before it set up so I doused it with gas and used a product called tarminator which I use for my detailing business. It took me 6 hours to get most of it off my garage floor and driveway. Today I got it off the 228, it got off the tires after driving it for a day or two. Unbelieveable that these idiots didn't warn anyone.

PB Blaster. It's similar to liquid wrench or WD-40.

[SerenVoX]

Installed front and rear painted reflectors from IND. Installed BMS Wheel Spacers. Installed Dinatronics Sport tune. Installed Millworks license plate tow mount. Customized my emblems with cheap vinyl stickers . Plasti dip 235i and taillights.

[redontheline]

Originally Posted by SF-Medic-514

Hello, I’m new to this website/forum and not quite sure if this the appropriate sub-section. I have completed all Dinan (Stage IV) performance mods to my 2016 Black Sapphire BMW M235ix (F22) and looking to add some final aesthetic mods. Specifically I am looking for Blacked-Out/”Murdered” Roundels for hood/trunk/wheels/steering and Blacked-out Dinan-4 and M emblems. I have seen them but cannot find where to purchase or the associated www does not work. Cost not a consideration (within reason). I desire professionally engineered parts for direct-fit. I am not interested in a do-it-yourself spray-paint-dipped/paste-on sticker. Please let me know where to find via reply or pm, Thanks!

Originally Posted by Dylan86

Final detail of the year, and into storage.

2x Hand Wash + Clay
Engine Bay Detail
Interior Detail
Wheels/barrels cleaned off car
De-greased and shampoo'd the wheel wells (I'm sick, I know) Looks new again!
Power washed the underbelly, which was in surprisingly good shape
Detailed the calipers with a tooth brush, emery cloth/aluminum cleaner to the rotor hats.

Tis the SKI'son!

Keep it coming. I'll be up to visit whistler in early January.

[Maynard]

Seeing a weather map with snow zones in FEET makes me not feel so bad about being in the upstate NY 'lake effect snow zone'.

Does the detail on your winter ride involve de-tangle combing and feeding all the sled dogs?

[Dylan86]

Originally Posted by Maynard

Seeing a weather map with snow zones in FEET makes me not feel so bad about being in the upstate NY 'lake effect snow zone'.

Does the detail on your winter ride involve de-tangle combing and feeding all the sled dogs?

LOL!

Luckily no! But if you don't have a 4x4 truck, or Subaru Forester, you're in for a real treat of a ride when it starts to come down! I have a Dakota that I use for winter months. All I do is work/ski/racing sim at these times anyways, so it's all I need

[EBM235]

Got the roof, diffuser, mirror caps, and reflectors painted. Decided to go with paint on the roof vs vinyl due to the heat in Socal

[aozer]

how much did it cost to paint the roof?

[EBM235]

$300

[abomb60]

Did the Dinan intake, MPPK lower air box and the M performance exhaust today. Car sounds amazing! Hopefully after Christmas I'll do the dinantronics stage 2.

[B_Rice]

Bumped into a parking block and scratched the front fangs a bit. Picture corresponds to how I'm feeling.