[Almaretto]

Originally Posted by barfastic

so, i coded it and everything went well!

except the car locking sound... the menu option appeared, but i cant toggle it on or off. its not greyed out either.

i read somewhere that some options take time to enable, so im going to go back in an hour and see if it changed. also... in the cheat sheet notes for that option, it mentioned something about configuration via FZD / CANSINE. is this some other coding i need to do?

Locking sound requires 302 alarm.

[ChrisFulton]

Is there any way to turn off the descriptions that pop up every time I select a different drive mode (Sport, Sport Plus, Eco).
I HATE it!

[pikcachu]

Originally Posted by ChrisFulton

Is there any way to turn off the descriptions that pop up every time I select a different drive mode (Sport, Sport Plus, Eco).
I HATE it!

there is a checkbox on iDrive to show the driving mode info

[ChrisFulton]

Originally Posted by pikcachu

there is a checkbox on iDrive to show the driving mode info

OK, (slinking away embarrassed) . . . THANK YOU!

[este]

So wondering if anyone has any input on an issue, I have successfully coded my car btw (Thanks for all the info!) but I tried coding another fellow M235i, I was able to read svt/FA, activate FA, "read coding data" and then enter different ecu's. Once I went to "code FDL" I received some errors (forgot to screenshot) they were definitely cafd related though, I remember reading. Most of the coding I did didn't end up working, but a couple did (ex: AC off on startup). I did just realize I hadn't added all the cafd files that were in the "63.3+ CAFD" folder into the "psdzdata\swe\cafd" , so maybe I was missing those? His car is a 2014, mine is 2015 if that matters. I wasnt able to get his I-step version either. Any help/tips would be appreciated!

[Almaretto]

Originally Posted by este

So wondering if anyone has any input on an issue, I have successfully coded my car btw (Thanks for all the info!) but I tried coding another fellow M235i, I was able to read svt/FA, activate FA, "read coding data" and then enter different ecu's. Once I went to "code FDL" I received some errors (forgot to screenshot) they were definitely cafd related though, I remember reading. Most of the coding I did didn't end up working, but a couple did (ex: AC off on startup). I did just realize I hadn't added all the cafd files that were in the "63.3+ CAFD" folder into the "psdzdata\swe\cafd" , so maybe I was missing those? His car is a 2014, mine is 2015 if that matters. I wasnt able to get his I-step version either. Any help/tips would be appreciated!

If you were able to "Read Coding Data" without errors, then updating PSdZ or inserting missing CAF's will not fix issue.

Post actual error. Then, community and I can further assist.

[beppeM3+123d]

Hi Guys
I have NBT evo oem fitted in the car f87 3/2017 production, the car is quite full BUT without apple car play.

I have check on etk possible retrofit and is possible to buy 6NR fsc code 9c.
on the connected drive already work M laptimer, spotify and other app.
Checking in comfrot mode the fsc is not present.

Can anyone explain how bmw is managing these functions?
is that provision that enable without FSC?

thank you for help

[Nbturbos]

Thanks for posting! I did a little research and couldn't find a difference between 2014 and 2015 for coding, but I'm not too familiar with coding on these cars. Maybe we have to get together and try again, and if it still doesn't work we'll take that screen shot next time, lol.

Originally Posted by este

So wondering if anyone has any input on an issue, I have successfully coded my car btw (Thanks for all the info!) but I tried coding another fellow M235i, I was able to read svt/FA, activate FA, "read coding data" and then enter different ecu's. Once I went to "code FDL" I received some errors (forgot to screenshot) they were definitely cafd related though, I remember reading. Most of the coding I did didn't end up working, but a couple did (ex: AC off on startup). I did just realize I hadn't added all the cafd files that were in the "63.3+ CAFD" folder into the "psdzdata\swe\cafd" , so maybe I was missing those? His car is a 2014, mine is 2015 if that matters. I wasnt able to get his I-step version either. Any help/tips would be appreciated!

[Almaretto]

Originally Posted by beppeM3+123d

Hi Guys
I have NBT evo oem fitted in the car f87 3/2017 production, the car is quite full BUT without apple car play.

I have check on etk possible retrofit and is possible to buy 6NR fsc code 9c.
on the connected drive already work M laptimer, spotify and other app.
Checking in comfrot mode the fsc is not present.

Can anyone explain how bmw is managing these functions?
is that provision that enable without FSC?

thank you for help

Carplay is provisioned through ConnectedDrive.

[este]

Originally Posted by Almaretto

If you were able to "Read Coding Data" without errors, then updating PSdZ or inserting missing CAF's will not fix issue.

Post actual error. Then, community and I can further assist.

So going through some logs these are some of the errors I was able to find:

Line 30823: Result error: MCDError Severity: 2051, Error Code: 58640, Description: resource not available, Vendor Code: 2008, Vendor Description: T2 timeout occured

Line 30841: description: T2 timeout on Service RDBI_FTP has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2008][VendorCodeDescription=T2 timeout occured]; LinkName: FEM_BODY_40_ETHERNET

Line 33173: description: Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=53311][ErrorCodeDescription=Module offline][VendorCode=20039][VendorCodeDescription=link is no longer active]; LinkName: FEM_BODY_40_ETHERNET

not sure if these mean anything or If it would be better to read the error in in e-sys in real time. Thanks!

[Almaretto]

Originally Posted by este

So going through some logs these are some of the errors I was able to find:

Line 30823: Result error: MCDError Severity: 2051, Error Code: 58640, Description: resource not available, Vendor Code: 2008, Vendor Description: T2 timeout occured

Line 30841: description: T2 timeout on Service RDBI_FTP has error in result: [Severity=2051][ErrorCode=58640][ErrorCodeDescription=resource not available][VendorCode=2008][VendorCodeDescription=T2 timeout occured]; LinkName: FEM_BODY_40_ETHERNET

Line 33173: description: Service RDBI_SVK has error in result: [Severity=2051][ErrorCode=53311][ErrorCodeDescription=Module offline][VendorCode=20039][VendorCodeDescription=link is no longer active]; LinkName: FEM_BODY_40_ETHERNET

not sure if these mean anything or If it would be better to read the error in in e-sys in real time. Thanks!

Was engine running while you were coding?

[este]

Originally Posted by Almaretto

Was engine running while you were coding?

Yes it was.

[RO-CK]

Hello again, I wrote a few weeks back, I'm having trouble on finding the code for leaving my halos full brightness on when turning the lights on. I tried all the options on the F22, F15 and F30 cheat sheets and couldn't get them to work. So I have come to the conclusion that it's because this car is 2018 and has the LEDs headlamps installed from factory.

The nearest I got is messing with FLE module - POL1_ and changing the third hex value to 0A, but that doesn't work as expected.

Anyone has coded their LEDs headlamps halos to maintain full bright when you turn them on?

Thanks in advance

[Almaretto]

Originally Posted by este

Yes it was.

Then, I am not sure.

Originally Posted by RO-CK

Hello again, I wrote a few weeks back, I'm having trouble on finding the code for leaving my halos full brightness on when turning the lights on. I tried all the options on the F22, F15 and F30 cheat sheets and couldn't get them to work. So I have come to the conclusion that it's because this car is 2018 and has the LEDs headlamps installed from factory.

The nearest I got is messing with FLE module - POL1_ and changing the third hex value to 0A, but that doesn't work as expected.

Anyone has coded their LEDs headlamps halos to maintain full bright when you turn them on?

Thanks in advance

If vehicle has adaptive headlamps or LED's, coding is in secondary lighting modules. You cannot blindly select hex values; an understanding of architecture is needed to know what value represents in section below (ie intensity, etc)

[stvward]

Hi, can you guys tell me if I can code the mirrors to fold on my new 2017 M240i if it does not have the folding facility button installed already? Can they be coded to fold on locking and unfold on unlocking without the fold button being present on the door panel next to the adjustment buttons? It is not the only aspect I would like to code but I had this question first. Could not find the answer in search.
Thank you.

[Almaretto]

Originally Posted by stvward

Hi, can you guys tell me if I can code the mirrors to fold on my new 2017 M240i if it does not have the folding facility button installed already? Can they be coded to fold on locking and unfold on unlocking without the fold button being present on the door panel next to the adjustment buttons? It is not the only aspect I would like to code but I had this question first. Could not find the answer in search.
Thank you.

Coding cannot overcome lack of hardware.

[este]

Originally Posted by Almaretto

Then, I am not sure.

Yeah weird, thanks anyways. maybe I’ll give it another go and see what happens and report back.

[RO-CK]

Originally Posted by Almaretto

Then, I am not sure.



If vehicle has adaptive headlamps or LED's, coding is in secondary lighting modules. You cannot blindly select hex values; an understanding of architecture is needed to know what value represents in section below (ie intensity, etc)

Thanks for that, by any chance someone has LED's that could share their hex values with me?

Thanks in advance

[alkadraz]

Hi all, did anyone try to code blinking rear led bars as indicators like that f30 on the video?

https://www.youtube.com/watch?time_c...&v=3MAxzkBKQFw

[Questofthetune]

Quick resurrect for a question- my VO code for my exhaust apparently disappeared. My SA saw it and it’s the reason my exhaust valve hasn’t operated. He said to just get it coded back in but what’s the number for exhaust? I VO coded Bluetooth but don’t remember taking anything out

[Almaretto]

Originally Posted by Questofthetune

Quick resurrect for a question- my VO code for my exhaust apparently disappeared. My SA saw it and it’s the reason my exhaust valve hasn’t operated. He said to just get it coded back in but what’s the number for exhaust? I VO coded Bluetooth but don’t remember taking anything out

Decode your VIN and compare to current FA in VCM.

[Questofthetune]

Originally Posted by Almaretto

Decode your VIN and compare to current FA in VCM.

Any way of doing this through the BimmerCode app or am I going to have to get esys again?