Quote:
Originally Posted by urke85
Ok, but you done coding first or you just put the leds in and they work without trouble?
Tnx
|
The front turn signals work without hyperflash, no coding was necessary . The rear brake lights had the system test flicker. All LEDs will have the test flicker with the brake lights, the stock incandescent bulbs react too slowly to show it. I used Carly to code out the rear brake lights system test. Unfortunately Carly never fixed their app to code the 3rd brake light on the outside of the 2 series so until I code the car manually I use the stock bulb on the outer most socket. You can use the rear LEDs without coding but personally I didn't want any flicker to draw attention form the PoPo. Without coding, the flicker happens with every rear brake bulb at about a 20 or 30 second interval.