[omera60]

So, unfortunately I don’t have any car at my disposal which currently has an activated IBS and since there is no going back on that I cannot show you the exact steps before I destroy someone else’s. However, in the attached picture that I took you can see the cover is riveted to the battery head, you need to break those pins in order to remove that side so you can access the IBS. When the IBS cable is being replaced they are going to do this no matter what so it shouldn’t be a problem. After removing the cover you’ll see the are that IBS as opened in between the battery and itself, this is where you should put the screw driver in. In some rare cases you can start by just jump starting it using the heads under the bonnet as well. If you want you can try this first and then move on to the screw driver level. If you want guidance I can help you after removing the cover, just upload pictures for every step and I’ll do my best explain it to you.