[BMW GENIUS]

Originally Posted by BlueM235

Back seat removal on the M235 is very easy. For removing the seat bottoms, you grab the front portion of the seat bottoms and pull towards you and up. You'll hear the clips disengage. This section is very light. Pulled the side bolsters out. Fold down the seat backs. You will see some torx bolts at the bottom (one for each side). Just undo the one bolt on each side, and then start pulling the seats apart. I started with the one on the left side of the car, pull it outwards and forwards, you'll eventually get it out. They are heavier.

A good idea is to put back the side bolsters to hide cabling and electronics to prevent damage. Put them back into its slot in the side bolster, then clip everything back in. 30 minute job. Good luck

THANK YOU SO MUCH